Set of 1-seat table with adjustment of angle of inclination of table top and a shelf, No. 3-6 + T-shaped chair, round tube, with HPL coating, No. 3-6
Frame color:
Chipboard color:
HPL color:
Price:
3 792
uahDescription:
Set of 1-seat student`s table with adjustment of angle of inclination of table top and a shelf, height groups No. 3-6 + T-shaped chair, round tube, with HPL coating, height adjustable, height groups, No. 3-6
Dimensions of the table: 700х500х580-760 mm. Weight: 10,5 kg.
Overall dimensions of the table:
● width – 700 mm;
● depth – 500 mm;
● height – 580, 640, 700, 760 mm.
Wooden parts of the table are made of laminated chipboard of 16 mm thickness. Edges of all wooden elements are finished with PVC edge tape of 1 mm and 0.5 mm thickness. Metal parts of the table for pupils are made of flat-oval tubes of 50х30х1,2 mm, 38х20х1,2 mm, 30х15х1,2 mm and round tubes of 25 mm and 32 mm and also have a protective decorative coating - powder enamel. Height adjustment of the table for pupils is imlemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. Plastic tips are fixed at the ends of the frame to prevent injury to students and damage to the floor. On the lower part of metal frame there is hole through which marking of height groups can be seen while adjusting the height of the table. Color marking in accordance to the height groups is applied in the form of the circle of about 10 mm. Also the scale of marking of height groups is applied on the metal frame with the help of laser engraving. Adjustment of an angle of inclination of table top is implemented due to the mechanism similar to rostomat with obligatory presence of limiters for the safety of usage by pupils. The limiter represents itself a locking mechanism, with a convenient handle, which blocks unauthorized change of an angle of inclination of the table top. The table top can be set either at an angle or horizontally. Angles of inclination of the table top are the following: 0°, 3°, 5°, 7°, 9°, 12°, 14°, 16°. In the central part of the tabletop there is a pencil case and holes for a book holder. There is a hole for a glass with stationery (the diameter of the hole for the glass is 60 mm), which is protected by a plastic sleeve. There are plastic transitional bushings in the places where the table height and the angle of inclination of the table top are adjusted, which ensure smooth adjustment, eliminate creaks and scratches when adjusting the height and give an ergonomic, modern look.
● width – 700 mm;
● depth – 500 mm;
● height – 580, 640, 700, 760 mm.
Wooden parts of the table are made of laminated chipboard of 16 mm thickness. Edges of all wooden elements are finished with PVC edge tape of 1 mm and 0.5 mm thickness. Metal parts of the table for pupils are made of flat-oval tubes of 50х30х1,2 mm, 38х20х1,2 mm, 30х15х1,2 mm and round tubes of 25 mm and 32 mm and also have a protective decorative coating - powder enamel. Height adjustment of the table for pupils is imlemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. Plastic tips are fixed at the ends of the frame to prevent injury to students and damage to the floor. On the lower part of metal frame there is hole through which marking of height groups can be seen while adjusting the height of the table. Color marking in accordance to the height groups is applied in the form of the circle of about 10 mm. Also the scale of marking of height groups is applied on the metal frame with the help of laser engraving. Adjustment of an angle of inclination of table top is implemented due to the mechanism similar to rostomat with obligatory presence of limiters for the safety of usage by pupils. The limiter represents itself a locking mechanism, with a convenient handle, which blocks unauthorized change of an angle of inclination of the table top. The table top can be set either at an angle or horizontally. Angles of inclination of the table top are the following: 0°, 3°, 5°, 7°, 9°, 12°, 14°, 16°. In the central part of the tabletop there is a pencil case and holes for a book holder. There is a hole for a glass with stationery (the diameter of the hole for the glass is 60 mm), which is protected by a plastic sleeve. There are plastic transitional bushings in the places where the table height and the angle of inclination of the table top are adjusted, which ensure smooth adjustment, eliminate creaks and scratches when adjusting the height and give an ergonomic, modern look.
Chipboard color: milky oak, jasmine, beech, yellow/lime, sakura/lavender, grey.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).
Dimensions of the chair: 385х435х700-820 mm. Weight: 4,59 kg.
Seat back size: 380х200 mm. Seat size: 380х350 mm.
The chair consists of overlaid seat, seat back and metal frame. The seat and the seat back are made of bent-glued plywood of 8-9 mm thickness and are covered with HPL plastic of 0.4-0.5 mm thickness. The edges of the seat and the seat back have a radius of rounding to prevent injury. Metal frame is made of round tubes 25 mm and 32 mm in diameter. The frame is covered with powder paint. Height adjustment is implemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. Plastic tips are fixed at the ends of the frame to prevent injury to students and damage to the floor. In the places of height adjustment there is a plastic transition sleeve, which ensures smoothness of adjustment, eliminates creaking and scratches while height adjustment. Fixation of the seat and the seat back to the frame of the chair is implemented with the help of screws of special mushroom-type form and nuts of rounded form, which prevent injury and damage to the clothes. On the lower part of metal frame there is hole through which a marking of height groups can be seen, while adjusting the height of the chair. Color marking in accordance to the height groups is applied in the form of a circle not less than 10 mm. Also, a height groups marking scale is applied on the metal frame using laser engraving.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).
HPL color: jasmine, beech, milky oak, blue, grey, beige, lilac.
Similar products
Vendor code:
32454+32452
4 206
uah
Vendor code:
90177+90297
3 480
uah
Vendor code:
70350+32350
4 302
uah
Vendor code:
54178+48480
4 470
uah
Glyanec